Enabling authentication for KIP System K series controllers

KIP System K Controller Configuration

  1.  Purchase and install a KIP Accounting and Cost Center license from the device vendor
  2. Open a web browser and enter the device's IP address in the URL bar (example: HTTP://192.168.0.123)
  3. Enter administrative credentials (default username/password is admin/kip)
  4. On the System Setup page, remove the check mark next to Allow Anonymous Use

 

Some important things to know about the "Allow Anonymous Use" option:

  • When this box is checked, users can print, scan or copy without entering a PIN code. Argos can track prints/plots when printing through a print driver or the PrintPro submission tool however, scan/copy jobs will be tracked to an unknown username (the unknown user name can be merged with a valid user to generate the Argos billing prompt)
  • When this box is unchecked, users will be required to enter a PIN code each time they scan/copy or print/plot from any submission methods including the Windows print driver, PrintPro and PrintPro.net.
  • The KIP firmware does not have an option to allow printing without a PIN code when requiring a PIN code for copy/scan activity.

The Argos OnBoard for KIP connector can now be configured.

 

 

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.